User Manual of PanoVu Series Network Camera
65
If you select Continuous, the video will be recorded automatically according to the time of the
schedule.
Record Triggered by Motion Detection
If you select Motion, the video will be recorded when the motion is detected.
Besides configuring the recording schedule, you have to set the motion detection area and
check the Trigger Channel checkbox in the Linkage Method of Motion Detection settings
interface. For detailed information, refer to the Step 1 in the Section 6.1.1 Configuring Motion
Detection.
Record Triggered by Alarm
If you select Alarm, the video will be recorded when the alarm is triggered via the external
alarm input channels.
Besides configuring the recording schedule, you have to set the Alarm Type and check the
Trigger Channel checkbox in the Linkage Method of Alarm Input Settings interface. For
detailed information, refer to Section 6.1.3 Configuring Alarm Input.
Record Triggered by Motion | Alarm
If you select Motion | Alarm, the video will be recorded when the external alarm is triggered
or the motion is detected.
Besides configuring the recording schedule, you have to configure the settings on the Motion
Detection and Alarm Input settings interfaces. Refer to Section 6.1.1 and Section 6.1.3 for
detailed information.
Record Triggered by Motion & Alarm
If you select Motion & Alarm, the video will be recorded when the motion and alarm are
triggered at the same time.
Besides configuring the recording schedule, you have to configure the settings on the Motion
Detection and Alarm Input settings interfaces. Refer to Section 6.1.1 and Section 6.1.3 for
detailed information.
Record Triggered by Audio Exception Detection: If you select Audio Exception Detection, the
video will be recorded when the audio exception detection is triggered. Besides configuring
the recording schedule, you have to configure the Audio Exception Detection.
Record Triggered by VCA events: If you select VCA, the video will be recorded when the either
of the VCA events is triggered. Besides configuring the recording schedule, you have to
configure the VCA.
Record Triggered by smart events: The smart evets include Line Crossing Detection, Intrusion
Detection, Region Entrance Detection and Region Exiting Detection. If you select to record by
one type of the smart events, the video will be recorded when the selected smart event is
triggered. Besides configuring the recording schedule, you have to configure the specific event
settings.
Record Triggered by All Events: If you select Event, the video will be recorded when any event
is detected.
Note:
Either the smart events or the VCA events are supported, which varies depending on the camera
models.
6.
Select the record type, and drag the mouse on the time bar to set the record schedule.
7.
Click
to save the settings.