User Manual of PanoVu Series Network Camera
4
4.
Confirm the password.
5.
Click OK to activate the camera and enter the live view interface.
Activation via SADP Software
SADP software is used for detecting the online device, activating the device, and resetting the
password.
Get the SADP software from the supplied disk or the official website, and install the SADP software
according to the prompts. Follow the steps to activate the camera.
Steps:
1.
Run the SADP software to search the online devices.
2.
Check the device status from the device list, and select an inactive device.
Select inactive device.
Input and confirm
password.
Figure 1-4
SADP Interface
3.
Create a password and input the password in the password field, and confirm the password.
4.
Click OK to save the password.
You can check whether the activation is completed on the popup window. If activation failed, make
sure that the password meets the requirement and then try again.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong
password of your own choosing (Using a minimum of 8 characters, including at least three of the
following categories: upper case letters, lower case letters, numbers, and special characters.) in
order to increase the security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password monthly or weekly can
better protect your product.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong
password of your own choosing (Using a minimum of 8 characters, including at least three of the
following categories: upper case letters, lower case letters, numbers, and special characters.) in
order to increase the security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password monthly or weekly can
better protect your product.