HIKVISION NB V6, User Manual

Page: 60 / 86

Figure 4-3 To add a remote IP address
Follow these steps to add a remote IP address
1. Click [Add] button, begin to add an account.
2. Type remote user’s IP address in the box, then press [Enter]
3. Click to select or cancel the user’s function list.
4. To enable IP verification besides username filter, be sure to click to select [Enable IP
Verification].
5. Press [OK] to save your changes.
4.3 Tools
4.3.1 E-Map
E-Map is used to display surveillance area in map, so user can easily find the location of
each camera, sensors. Moreover, it shows the alarms been triggered.
To enter E-Map Edit panel, click [Others], click [Tools], and then click [E-Map].
Page 60 of 86