HIKVISION NB V6, User Manual

Page: 26 / 86

Figure 2-8 Recording Configuration
Under
Recording Quality :
¾
Set record Resolution: click to choose from CIF, 2CIF, DCIF or D1 (4CIF) under
Recording Quality.
¾
Set record quality: click to choose from Highest, Level1, Level2, Level3, Level4 or
Level5 as need.
¾
Set frame rate: set the appropriate Frame Rate per Second by using up or down
arrow under Recording Quality.
¾
Record audio: To record audio and video simultaneously, click to select [Record
Audio] under Recording Quality.
Under Storage:
¾
Set storage drives: under [Storage], set appropriate start and end partitions that you
want to store your video files.
¾
Set Maximum Recording Time: By default, every 30 minutes’ video will be created to
a video file. You can change the value here to control the video file size.
¾
Enforce Storage limits: By click to select this checkbox, you can set a recording rate
upper limit. It is recommended to use in small hard disk circumstance.
Under Networking:
¾
Dual Stream: click to choose this checkbox to enable Dual stream function.
¾
Set network transmitted video quality: click to choose from Highest, Level1, Level2,
Level3, Level4 or Level5 as needed.
¾
Set network transmitted video frame rate: set the appropriate Frame Rate per
Second by using up or down arrow under Recording Quality.
¾
Maximum Files Size: choose an appropriate value to set the maximum recording files
size in an hour. You can adjust this parameter to adapt to network media
Page 26 of 86