Network → TCP/IP to edit the door station IP address, subnet mask, gateway
and other parameters.
4.3 Activate Device via Client Software
Steps
1. On the device management page, select Encoding Device/Door Station, and
select the device to be activated in the online device area.
2. Click Activate to enter the activation page.
3. Create a password, and confirm the password. Click OK to activate the device.
Note
We highly recommend you to create a strong password of your own choosing
(using a password from 8 to 16 characters, including at least two kinds of
following categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product.
4.4 Activate Device via Batch Configuration Tool
Steps
1. Run the batch configuration tool, select the online device that needs to be
activated in the online device area, and click Activate.
2. Set the activation password in the Activate Device dialog box and click OK to
complete the activation.
Caution
In order to improve the network security, the set password must be from 8 to 16
digits, and be a combination of at least two or more types of numbers,
lowercase letters, uppercase letters, and special characters.
Note
• If the device is in an inactive status, you cannot remotely configure the
device.
• By holding Ctrl or Shift, select multiple inactive online devices and click
Activate to activate the selected devices in batches.
Face Recognition Door Station with 8-inch Screen User Manual
25
