10.9 Debug
Note
The debug configurations below are only provided to debug the device by the professionals.
10.9.1 Enable Information Overlay
You can overlay the algorithm POS information and positioning frames on the captured pictures or
playback images.
Steps
1. Go to Configuration → Capture → Advanced → System Service .
2. Check the debug information according to your needs.
Enable Algorithm POS Information Debug
The algorithm POS information will be overlaid on the playback image when you play back
the video with the dedicated tool.
Enable Positioning Frame Debug
The positioning frames of vehicle bodies and license plates will be overlaid on the captured
pictures.
Enable Closed Positioning Frame
The bottom lines of the positioning frames on the captured pictures will display. The frames
will be closed.
3. Click Save.
10.9.2 Filter Capture
Set the filter capture information. The filtered conditions will not be captured.
Steps
1. Go to Configuration → Capture → Advanced → Vehicle Capture and Recognition Service .
2. Check the information to be filtered according to your needs.
Filter Checkpoint Capture of Same Vehicle
It is used to debug the device with the same vehicle. When the same vehicle is triggered
many times during a short period in the scene, the checkpoint pictures of the vehicle will not
be captured.
Enable Turning Traffic Flow Statistics
In video analysis E-police mode, the turning traffic flow statistics will be uploaded to the
connected platform.
Filter Violation Capture of Same Vehicle
Network Traffic Camera Operation Manual
49
Summary of Contents for iDS-TCE507-BR/1550
Page 1: ...Network Traffic Camera Operation Manual ...
Page 67: ...UD26001B ...