Steps
1. Go to Configuration → Network → Data Connection → FTP .
Figure 4-2 Set FTP
2. Check Enable FTP.
3. Select Number of Enabled FTP.
Note
You can only enable one FTP if the device does not support the violation capture, or you should
set different uploaded data for each FTP respectively.
Example
If you select FTP 1 as Upload Checkpoint Data, FTP 2 will be selected as Upload Violation Data
by default.
4. Set FTP Parameters.
1) Select Sever Address Type and enter corresponding information.
2) Enter Port.
3) Enter User Name, Password, and confirm the password.
4) Select Protocol Type.
5) Select Directory Structure.
Note
You can customize the directory structure according to your needs.
5. Optional: Enable upload functions.
Note
Supported functions vary with different models. The actual device prevails.
Not Upload Plate Close-up
The close-up pictures of a license plate will not be uploaded.
Upload Face Picture
Upload face close-up pictures to the FTP server.
Upload Target Picture
Network Traffic Camera Operation Manual
14
Summary of Contents for iDS-TCE507-BR/1550
Page 1: ...Network Traffic Camera Operation Manual ...
Page 67: ...UD26001B ...