Before You Start
●
Register the domain name on the DDNS server.
●
Set the LAN IP address, subnet mask, gateway, and DNS server parameters. Refer to "Set IP
Address" for details.
●
Complete port mapping. The default ports are 80, 8000, and 554.
Steps
1. Go to Configuration → Network → Network Parameters → DDNS .
Figure 6-3 Set DDNS
2. Check Enable DDNS.
3. Enter the server address and other information.
4. Click Save.
5. Access the device.
By Browsers
Enter the domain name in the browser address bar to access the device.
By Client Software Add domain name to the client software. Refer to the client software
manual for specific adding methods.
6.4 Set SNMP
You can set the SNMP network management protocol to get the alarm event and exception
messages in network transmission.
Before You Start
Download the SNMP software and manage to receive the device information via SNMP port.
Network Traffic Camera Operation Manual
34
Summary of Contents for iDS-TCE507-BR/1550
Page 1: ...Network Traffic Camera Operation Manual ...
Page 67: ...UD26001B ...