Steps
1. Go to Configuration → Network → Network Parameters → DDNS .
Figure 6-4 Set DDNS
2. Check Enable DDNS.
3. Enter the server address and other information.
Note
You can select IPServer, DynDNS, and NO-IP for the DDNS type.
4. Click Save.
5. Access the device.
By Browsers
Enter the domain name in the browser address bar to access the device.
By Client Software Add domain name to the client software. Refer to the client software
manual for specific adding methods.
6.4 Set SNMP
You can set the SNMP network management protocol to get the alarm event and exception
messages in network transmission.
Before You Start
Download the SNMP software and manage to receive the device information via SNMP port.
Steps
1. Go to Configuration → Network → Network Parameters → SNMP .
2. Check Enable SNMPv1/Enable SNMP v2c/Enable SNMPv3.
Network Traffic Camera Operation Manual
36
Summary of Contents for iDS-TCE500-B
Page 1: ...Network Traffic Camera Operation Manual...
Page 68: ...UD28262B...