2.1
Required tools
Name
Function
Remark
Laptop
Configuration,
Recording,
Obtain information
Cat5
Connect with camera
Tape/telemeter
Measure the height
Height should be correct
Screw driver
Installation
Multi-meter
Measure the type of the
open/ closed signal, voltage
value
It is a key parameter to insure the accuracy rate.
The signal of the open/closed door needs to be
configured and measure correctly.
Client demo
To enable functions like SSH
and height information for
configuration
HCNetSDKV5.2.5.151_build20161011_win32.zip
Secure CRT/putty To print serial information
2.2
Installation Position
2.3.1 General information
Mobile dual-lens people counting camera
requires the high level of the installation position and the
environment
.
Please pay great attention to the mounting position. Inappropriate mounting position
may cause loss of accuracy.
What is “Entry/Exit Area”: for bus, it’s near the door where standing is forbidden, region of
the first step usually; for coach, it’s the combined region of the first step and the second
step.
Camera should be installed near the door, if the height of the door is larger than or equal
to 2.2m, meanwhile the maximum detection width can totally cover the whole door, it can
be installed above the door frame directly. If not, it can adjust slightly to be inside. Please
make sure that the camera is close to the door and the distance should not be more than
1/2 of the Entry/Exit area. Keep the position
in the center of Entry/Exit area.
Lens of the camera should face downward vertically with logo of Hikvision inward. Keep the
arrow on the sticker outward if the mounting template is used.
In live view, make sure you can see the footboard region and part of ground outside,
counting area can cover footboard region and part of the ground outside.
The movement direction of People is up and down when they get on the bus or leave.