3.1.4 People Counting Configuration
1)
Before the configuration, keep the door open.
2)
Enable People counting: [Configuration]-[People Counting], check “Enable People
Counting”.
3)
Manual calibration mode: input the height (from Entry/Exit area to the camera) and click
“Calibrate”, then a red frame and a yellow line will automatically appear in the image. The
red frame is for counting and the yellow line is for detection. Make sure the red frame covers
the Entry/Exit area and part of ground outside and the arrow of the yellow line points inside.
4)
Move the yellow line close to the door then adjust its length to ensure it will not been
crossed by the door.