2.3.2
Installation with Junction Box/Inclined Ceiling
Mount
Before you start:
You need to purchase a junction box or inclined
ceiling mount in advance.
Ceiling mounting with junction box and inclined
ceiling mount are similar. Following steps take
junction box as an example.
Steps:
1.
Paste the drill template for junction box to the place
where you want to install the camera.
2.
(Optional) For cement wall, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
Figure 2-33
Drill Template
3.
(Optional) Drill the cable hole, when the cables are
routed through the wall.
4.
Turn the trim ring counterclockwise to remove it
from the camera.
Figure 2-34
Remove the Trim Ring
5.
Take apart the junction box.
6.
Fix the camera onto the junction box cover with
three PM4 × 10 screws.
Figure 2-35
Fix the Camera onto Junction Box Cover
7.
Secure the junction box body on the wall with four
PA4 × 25 screws.
