ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA
23
Before adding a camera, make sure the IP camera to be added is in active status. If the camera is in
inactive status, click the inactive icon of the camera to set the password to activate it. You can also
select multiple cameras from the list and click
One-touch Activate
to activate the cameras in batch.
Click
Exit
to complete the Setup Wizard.
Adding and Enabling Analog Cameras
Connect analog camera(s) to the “Video In” BNC connectors. Analog cameras are enabled by default; no
further action is required.
Adding and Connecting IP Cameras
Activating IP Cameras
Purpose:
Before adding the camera, make sure the IP camera to be added is in active status.
Select
Add IP Camera
from the right-click menu in live view mode or Go to
Menu
>
Camera
>
Camera
to
enter the IP camera management interface.
For detected online IP cameras in the same network segment, the
Password
status shows whether
it is active or inactive.
IP Camera Management Interface
Click the inactive icon of the camera to enter the following interface to activate it. You can also select
multiple cameras from the list and click
One-touch Activate
to activate the cameras in batch.
