Cautions
Fire Prevention
No naked flame sources, such as lighted candles, should be placed on the equipment.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with 5 VDC according to the IEC60950-1, or the power level PS2 with 5 VDC
according to the IEC62368-1 standard. Refer to technical specifications for detailed
information.
Installation
Install the equipment according to the instructions in this manual.
Never place the equipment in an unstable location. The equipment may fall, causing
serious personal injury or death.
DO NOT touch the sharp edges or corners.
Transportation
Keep the device in original or similar packaging while transporting it.
DO NOT drop the product or subject it to physical shock.
Power Supply
Refer to the device label for the standard power supply. Please make sure your power
supply matches with your device.
Maintenance
If the product does not work properly, please contact your dealer or the nearest service
center. We shall not assume any responsibility for problems caused by unauthorized repair
or maintenance.
Cleaning
Please use a soft and dry cloth to clean the interior and exterior surfaces. Do not use
alkaline detergents.
Using Environment
When any laser equipment is in use, make sure that the device lens is not exposed to the
laser beam, or it may burn out.
DO NOT aim the lens at the sun or any other bright light.
To avoid heat accumulation, good ventilation is required for a proper operating
environment.
DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or damp
environments. For temperature and humidity requirements, see device specification.
DO NOT expose the device to high electromagnetic radiation.
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug
the power cable, and contact the service center. When any laser equipment is in use,
make sure that the device lens is not exposed to the laser beam, or it may burn out.
DO NOT aim the lens at the sun or any other bright light.
To avoid heat accumulation, good ventilation is required for a proper operating
environment.
DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or damp
environments. For temperature and humidity requirements, see device specification.
DO NOT expose the device to high electromagnetic radiation.
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug
the power cable, and contact the service center.
Summary of Contents for DS-UC8
