Guidance Terminal User Manual
10
The installation location should be large enough to contain the guidance terminal
and accessory.
Steps:
1.
Rotate the key in the keyhole of the guidance terminal and open the cover of the
machine body.
If the guidance terminal supports PoE, it has 2 parts of power supply. The upper
part is used to provide power for cameras and terminal with 12 VDC. The lower
part is used to provide power for the PoE interfaces with 48 VDC.
Machine
Body
Cover
Power
Supply
Installation
Hole
Keyhole
HDD Slot
Figure 2-3
Open the Cover
2.
Install HDD.
1)
Loosen the set screws of the HDD and terminal, and lift the HDD slot to the
appropriate position.
2)
Insert HDD to the slot, and fix it with 4 SC-CUNC6-32*5 screws.
3)
Repeat step 1) and 2) to install other HDDs. Each HDD should be fixed with
4 screws.
4)
Lay down the HDD slot, and use M3 screw to fix the screw hole. Tighten the
nut to fix the HDD slot to the terminal.
