Auxiliary Care Radar • User Manual
7
The radar will not upload the detection data.
Report once
The radar will only upload data once for sub-device data searching in the RS-485 network.
The report mode will not be saved if the device is powered off. It will restore to the default mode
after re-powered on. The default mode varies with different software version.
Click
to set the radar status.
Enter standby mode
The radar will be standby and stop transmitting. If the radar is powered off and does not receive
wakeup command after powered on again, then it will still be standby mode.
Awake
If the radar is powered off, the awake mode will be kept after it is powered on again.
Main Page
After selected Report form mode as Start reporting, you can view the uploaded information on
the main page. It includes the information of times of movements, get up alarm, the time in the
bed, the time out of the bed, breath rate (times/minute), heart rate (times/minute), times of
movements and if the human body is in the bed.
Main Page
Summary of Contents for DS-TDSB00-EKH
Page 1: ...0 Auxiliary Care Radar User Manual...
Page 17: ...0...
