User Manual of Parking Camera
33
Figure 7-2
Time Settings
Select the Time Zone.
Select the Time Zone of your location from the drop-down menu.
Synchronizing Time by NTP Server.
(1)
Check the checkbox to enable the
NTP
function.
(2)
Configure the following settings:
Server Address:
IP address of NTP server.
NTP Port:
Port of NTP server.
Interval:
The time interval between the two synchronizing actions with NTP server.
Figure 7-3
Time Sync by NTP Server
Note
:
If the camera is connected to a public network, you should use a NTP server
that has a time synchronization function, such as the server at the National Time
Center (IP Address: 210.72.145.44). If the camera is set in a customized network,
NTP software can be used to establish a NTP server for time synchronization.
Synchronizing Time Synchronization Manually
Enable the
Manual Time Sync
function and then click
to set the system time
from the pop-up calendar.
Note:
You can also check the
Sync with computer time
checkbox to synchronize the
time of the camera with that of your computer.
