User Manual of Parking Camera
11
Chapter 3
Network Connection
Before you start:
If you want to set the parking camera via a LAN (Local Area Network),
please refer to
Section 3.1
Setting the Parking Camera over the LAN
.
If you want to set the parking camera via a WAN (Wide Area Network),
please refer to
Section 3.2
Setting the Parking Camera over the WAN
.
3.1
Setting the Parking Camera over the LAN
Purpose:
To view and configure the camera via a LAN, you need to connect the parking
camera in the same subnet with your computer, and install the SADP or
iVMS-4200 software to search and change the IP address of the parking camera.
Note:
For the detailed introduction of SADP, please refer to Appendix 1.
3.1.1
Wiring over the LAN
The following figures show the two ways of cable connection of a parking
camera and a computer:
Purpose:
To test the parking camera, you can directly connect the parking camera to
the computer with a network cable as shown in Figure 3-1.
Refer to the Figure 3-2 to set parking camera over the LAN via a switch or
a router.
Parking Camera
PC
Network Cable
Figure 3-1
Connecting Directly
Parking Camera
Switch or Router
PC
Network Cable
Network Cable
Figure 3-2
Connecting via a Switch or a Router
3.1.2
Detecting and Changing the IP Address
You need the IP address to visit the parking camera.
