HIKVISION DS-TCP345-K User Manual Download Page 2

Page: 2 / 91

User Manual of Parking Camera

User Manual

This user manual is intended for users of

Parking Camera

. It includes instructions on

how to use the Product. The software embodied in the Product is governed by the user

license agreement covering that Product.

About this Manual

This Manual is subject to domestic and international copyright protection.

Hangzhou Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to

this manual. This manual cannot be reproduced, changed, translated, or distributed,

partially or wholly, by any means, without the prior written permission of Hikvision.

Trademarks

and other Hikvision marks are the property of Hikvision and are

registered trademarks or the subject of applications for the same by Hikvision and/or

its affiliates. Other trademarks mentioned in this manual are the properties of their

respective owners. No right of license is given to use such trademarks without express

permission.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT

LIMITATION

THE

IMPLIED

WARRANTIES

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

REGARDING

THIS MANUAL. HIKVISION DOES

NOT WARRANT,

GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE

OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY

OF INFORMATION CONTAINED HEREIN. YOUR USE OF THIS MANUAL

AND ANY RELIANCE ON THIS MANUAL SHALL BE WHOLLY AT YOUR

OWN RISK AND RESPONSIBILITY.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO

EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR

AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,

INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,

DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,

SECURITY BREACHES, OR LOSS OF DATA OR DOCUMENTATION, IN
CONNECTION WITH THE USE OF OR RELIANCE ON THIS MANUAL, EVEN

IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES.

Summary of Contents for DS-TCP345-K




























































































Search results

Summary of Contents for DS-TCP345-K

Reviews:

Related manuals for DS-TCP345-K

Brands by name

Popular brands

HIKVISION DS-TCP345-K, User Manual

Search results

Summary of Contents for DS-TCP345-K

Reviews:

Related manuals for DS-TCP345-K

Brands by name

Popular brands