HIKVISION DS-PF-E0204 Series, Product Instruction

Page: 27 / 34

26
Hang on the wire with soft metal
⑨
Warning signs
The warning sign of “High Voltage No Climbing” should be installed every 10 meters on the top
line of high conductivity wire and fixed on with soft metals. Remember to fix the three holes on the
warning sign in case that it sways in the wind.
Fix on post
with soft
metal
⑩
Energizer
1. Energizer outside should be installed in the waterproof box that is mounted
under the fence or at the partitions of the fence (calibrated in the drawings). There requires a 40
cm interval between fence and waterproof box that can be fixes on the wall with concrete anchors,
as is shown in fig:
Fix waterproof
box with
expansion
screws at the
back.
2. Make sure the energizer, waterproof box and earthing pile are well connected.
The grounding of energizer (weak voltage grounding, connect with the shielding layer of
communication wire) and high-voltage fences should be apart from each other to avoid
interference.
3. The high-voltage lead of energizer should be connected with front end fences through PVC
conduit and the joints can be reliably connected with a wire connector (or self winding).
4. A larm output line and power line should be separated from the high-voltage
line and use a separate conduit.
DS-PF-E0204 Series Energizer User Manual