Panic Alarm Station
User Manual
25
Platform Access Configuration
2. Check Enable Platform Access to enable the Platform Access function.
3. Set the platform access parameters.
Access Type
Select the platform to be accessed.
Server IP or Domain Name
Enter the IP address or domain name of the platform.
Access to Server Port
Enter the port number of the platform.
Panel ID
Panel ID is the unique identification of the device.
Communication Network
Select the network mode for communication with platform.
Registration Status
Display the status which the device registers to the platform.
4. Click Save, and you can access to the device via platform.
Configure the alarm center. When an alarm is triggered, the alarm information can be uploaded to
the configured alarm center.
Steps
1. Click
to enter the Remote Configuration page, go to Network → Network Center Settings.
