HIKVISION DS-MP7516 Series, User Manual

Page: 48 / 87

Mobile Network Video Recorder User Manual
47

Post-Record: After the event finished, the video can also be recorded for a certain time.
For example, when an alarm ends at 11:00, if the post-record time is set as 5 seconds,
the camera records till 11:00:05.
Step 6 Click OK.
8.2.2 Configure Motion Detection Recording
Purpose:
In the motion detection recording, once a motion event occurs, the device starts to record.
Step 1 Go to Menu > Other Settings > Camera.
Step 2 Click Set of More Setting.
Figure 8-7 Motion Detection Settings
Step 3 Check Motion Detection.
Step 4 Click Area Settings of Motion Detection.
Step 5 Edit area settings. For details, refer to 12.11 Configure Detection Area.
Step 6 Set the camera to trigger motion detection recording.
4) Click Handle of Motion Detection.
5) Click Set of Triggered Alarm.
6) Check cameras to trigger recording and click OK.
7) Click OK.
Step 7 Click OK.
Step 8 Set motion detection recording schedule. For details, refer to 8.2.5 Configure Schedule.
Recording type must be alarm, motion|alarm, or motion&alarm.
8.2.3 Configure Alarm Triggered Recording
Purpose:
Follow the procedure to configure alarm triggered recording.