Mobile Digital Video Recorder User Manual
56
8.4
Serial Port Settings
Purpose:
Two types of serial ports are provided: RS-232 and RS-485.
The RS-232 port can be used in two ways:
Console
: Connect a PC to the DVR through the PC serial port. DVR parameters can be configured by using software
such as HyperTerminal. The serial port parameters must be the same as of the device when connecting with the PC
serial port.
Transparent Channel
: Connect a serial device directly to the device. The serial device will be controlled remotely by
the PC through the network and the protocol of the serial device.
The RS-485 port can be used for transparent channel only.
Steps:
1.
Enter the Serial Port Settings interface to configure the parameters.
Menu > Basic Settings > SerialPort
Figure 8. 17
Serial Port Settings Interface
2.
Select serial port type and configure the parameters, including baud rate, parity and usage.
3.
If a Serial Port Box is connected to the device, click
Set
to configure the serial port box parameters.
Figure 8. 18
SPBOX Set
4.
Select the Serial Port Type in the dropdown list and configure other parameters
, including baud rate, parity and usage.
5.
Click
OK
to save the settings and go back to upper menu.
6.
Click
OK
to save the settings.
Summary of Contents for DS-MP7504
Page 1: ...Mobile Digital Video Recorder User Manual UD 6L0204D1113A01...
Page 41: ...Mobile Digital Video Recorder User Manual 40 Figure 5 6 Wi Fi Status Interface...
Page 43: ...Mobile Digital Video Recorder User Manual 42 Figure 6 2 Push Mode Platform...
Page 67: ...User Manual of Mobile Digital Video Recorder 66...
