HIKVISION DS-MI9605-GA Series, Quick Start Manual

Page: 8 / 237

English
7
Mobile Enforcement Video Recorder
 Install the device in the position with weak vibration (such as the part
behind the driver’s seat, the part behind the passenger’s seat, etc.) and
far away from the engine.
 Install the device in the position far away from heat and with good
ventilation.

Leave enough space for ventilation, heat dissipation, plugging or
unplugging dummy HDD, etc.
 Place the device horizontally. The device may be damaged if it is placed
in the tilt angle.

Fix the device firmly to prevent it from falling down during the driving.
Camera and Mobile Positioning System
 Prevent the camera lens from being covered by objects.

The mobile positioning system should be fixed firmly on the vehicle roof
center with bracket to avoid falling down.
 Ensure the mobile positioning system installation position can bear eight
times of the total weight of the positioning system and accessories.
LCD Monitor

Leave enough space for ventilation and heat dissipation.
 It is recommended to install the monitor on the vehicle center console or
reserved monitor slot. DO NOT install it in the position obscuring the
vision of the driver.
Install Antenna
Note: The installation of 3G/4G and Wi-Fi antennas are only applicable to
the device supporting 3G/4G and Wi-Fi.
 Connect antennas to corresponding antenna interfaces.
 Place the antennas vertically with the signal receiving ends facing
upwards.

If the cables are too long, you can roll them up to prevent the signal from
being affected.

Install the 3G/4G antenna in the windshield, seat backrest, or other non-
metallic objects. Keep at least 50 cm away from metal objects.