DS-MCW405/32G/GPS/WIFI Body Camera User Manual
UM DS-MCW405/32G/GPS/WIFI 042021NA
17
3.
Click
Save
.
3.5.5
Set Recording Parameters
Set the local record recording parameters, including pre-record, post-record, encoding type, etc.
1.
Go to
Device Configuration > System Settings
.
2.
Set the parameters.
•
Pre-Record
: The time you set to record before the recording start time. For example, if you start
recording at 10:00, if you set the pre-record time as 5 m, the device records it at 9:55.
•
Post-Record
: The time you set to record after the recording end time. For example, if you stop
recording at 11:00, if you set the post-record time as 5 m, it records until 11:05.
•
Video Clip Time
: Maximum size for every video. Video will be automatically recorded into a new clip
once reaching the size.
3.
Go to
Device Configuration > Extended Settings
to select
Code Type
.
NOTE:
Reboot the device to have the settings take effect.
3.5.6
Enable LED Indicator
If you want to show the device status via indicators, enable LED indicators.
1.
Go to
Device Configuration > System Settings
.
2.
Set
LED Light
as
Open
.
3.
Click
Save
.
Result
The LED indicators will show different colors and status under different conditions. Refer to Quick Start
Guide for detailed indicator description.
3.5.7
Set GPS Time Synchronization
After GPS is enabled, the device time can be synchronized via GPS.
1.
Go to
Device Configuration > System Settings
.
2.
Enable or disable
GPS Synchrony
.
3.
Click
Save
.
3.5.8
Set Quick Charging
You can enable or disable quick charging mode. The mode is enabled by default.
1.
Go to
Device Configuration > Extended Settings
.
2.
Check or uncheck
Quick Charging
.
Summary of Contents for DS-MCW405
Page 1: ...DS MCW405 32G GPS WIFI Body Camera User Manual...
Page 31: ......
