manualshive.com logo in svg

HIKVISION DS-KH6320-WTE2, Configuration Manual, Page: 41 / 59

Share
Download
HIKVISION DS-KH6320-WTE2 Configuration Manual Download Page 41

3. Click Save.

Note

• Calling duration is the maximum duration of indoor station when it is called

without being received. The range of maximum ring duration varies from 30s

to 60s.

• Live view duration is the maximum time of playing live view of the indoor

station. The range of maximum live view time varies from 10s to 60s.

• Call forwarding refers to the ring duration limit beyond which the call is

automatically forwarded to the mobile phone designated by the resident.

The range of call forwarding time varies from 0s to 20s.

• For indoor extension, it only requires setting the maximum live view time.

Permission Password

Click Permission Password to enter password changing page.
Select password type. Enter a new password and confirm it.
Click Save to complete the settings.

Figure 3-10 Permission Password

Note

For indoor station, you can change the arm/disarm password.

Zone Alarm

Steps
1. Click Zone Alarm to enter the zone settings page.

Video Intercom Indoor Station Configuration Guide

32

Summary of Contents for DS-KH6320-WTE2




























































Reviews:

No comments