manualshive.com logo in svg

HIKVISION DS-KH6320-WTE2, Configuration Manual, Page: 27 / 59

Share
Download
HIKVISION DS-KH6320-WTE2 Configuration Manual Download Page 27

You can set the displayed time and date format, current time. You can also tap

Sync Time and enable NTP to synchronize the device time.

Note

• Make sure your device is connected with the network or the NTP function

will not available.

• For details, see Synchronize Time.

System Language

Tap System Language to change the system language.

Note

The indoor station supports 11 languages.

Brightness Adjustment

Tap + or - to adjust the screen brightness.

Clean Screen

Enable Clear Screen and the screen will be locked for 30s. And you can clear the

screen within the time duration.

Note

• After enabling Clear Screen function, press and hold the Unlock key to exit

the clear screen mode.

• The device without unlock key will exit the clear screen mode automatically

when the time is out.

TF Card

Tap TF Card to view the TF card and you can also format the TF card.

Tap Settings →   to enter the advanced settings page.
Reboot Device

Tap Reboot Device to reboot the system.

Tap Settings →   → Configuration .
Enter the admin (activation) password and tap OK to enter the local information

page.
Tap   to enter the system maintenance page.
Upgrade

Tap Upgrade to get the upgrade package online and reboot automatically.

Video Intercom Indoor Station Configuration Guide

18

Summary of Contents for DS-KH6320-WTE2




























































Reviews:

No comments