HIKVISION DS-KH6320-WTE2 Configuration Manual Download Page 37 | Manualshive

Page: 37 / 59

HIKVISION DS-KH6320-WTE2 Configuration Manual Download Page 37

Figure 3-5 System Maintenance

• Reboot: Click Reboot and the system reboot dialog box pops up. Click

Yes to reboot the system.

• Restore Default Settings: Click Restore Default Settings to restore the

default parameters. All default settings, excluding network parameters,

will be restored.

• Restore All: Click Restore All to restore all parameters of device and

reset the device to inactive status.

Note

all default settings, including network parameters, will be restored. The

device will be reset to inactivated status.

• Import Configuration File: Click Import Configuration File and the import

file window pops up. Select the path of remote configuration files. Click

Open to import the remote configuration file. The configuration file is

imported and the device will reboot automatically.

• Export Configuration File: Click Export Configuration File and the export

file window pops up. Select the saving path of remote configuration files

and click Save to export the configuration file.

Video Intercom Indoor Station Configuration Guide

28

«
...
35
36
37
38
39
...
»

Summary of Contents for DS-KH6320-WTE2




























































Reviews:

No comments