Tap in the upper-right corner of the visitor terminal's home page to enter the system settings
page.
Note
For self-service visitor terminal, you are required to authenticate your identity as the administrator
first. In this case, enter the administrator password to authenticate.
Language
Switch system language.
Time
Set time zone and current time for the visitor terminal.
Time Zone
Select the time zone where the visitor terminal locates.
Current Time
Set the current time for the visitor terminal.
Person and ID Comparison
If enabled, the visitors are required to capture a face picture via the visitor terminal at the
beginning of registration. After that, the system will compare the face picture with the profile
picture on the scanned ID (e.g., passport). In this way, using fake ID for registration will be
prevented.
Person and ID Comparison Threshold
Set the threshold (0 to 100) of similarity level for determining that the visitor's captured face
picture and her/his ID photo match with each other. The higher the value, the stricter the
facial comparison will be.
Note
It is recommended that you use the default value (60).
Allow Skipping Person and ID Comparison
If enabled, the visitor is allowed to skip person and ID comparison at the beginning of her/his
registration.
Allow Skipping Person and ID Comparison/Temperature Screening
Note
The parameter is only available on the staff-service terminal that supports temperature
screening.
If enabled, the visitor is allowed to skip person and ID comparison and temperature
screening at the beginning of her/his registration.
Face Rating Threshold
DS-K5032 Series Visitor Terminal User Manual
17
