By default, the keyfob is in one-to-one mode. The keyfob's DIP switch is towards 1 (OFF). The
keyfob can control only one turnstile.
One-to-Many Mode
The keyfob's DIP switch is ON. In this mode, the keyfob can control multiple turnstiles.
1. Power off the turnstile.
2. Set the No.4 switch of the DIP Switch on the access control board to the ON side.
3. Power on the turnstile and it will enter the keyfob pairing mode.
4. Hold the Close button for more than 10 seconds. Or pair turnstile and keyfob in the client
software, see Manage Keyfob User of the user manual for more details.
The keyfob's indicator of the will flash twice if the pairing is completed.
5. Set the No.4 switch to OFF, and reboot the turnstile to take effect.
Note
• Only one turnstile can pair the keyfob. If multiple turnstiles are in the pairing mode, the
keyfob will select only one of them to pair.
• For details about DIP switch value and meaning, see Access Control Board UART Description .
6. Optional: Go to System → User → Keyfob User on the remote control page of the client
software to delete the keyfob.
5.2 Initialize Device
Steps
1. Set the No.8 switch of the DIP 2 Switch on the access control board to the ON side.
DS-K3Y411X Series Flap Barrier Quick Start Guide
36
