●
Do not ingest battery, Chemical Burn Hazard.
This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close
securely, stop using the product and keep it away from children. If you think batteries might have
been swallowed or placed inside any part of the body, seek immediate medical attention.
●
If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the device yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cautions:
●
The equipment shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the equipment.
●
Ensure correct wiring of the terminals for connection to an AC mains supply.
●
The equipment has been designed, when required, modified for connection to an IT power
distribution system.
●
+ identifies the positive terminal(s) of equipment which is used with, or generates direct current.
+ identifies the negative terminal(s) of equipment which is used with, or generates direct
current.
●
No naked flame sources, such as lighted candles, should be placed on the equipment.
●
This equipment is suitable for mounting on concrete or other non-combustible surface only.
●
Install the equipment according to the instructions in this manual.
●
To prevent injury, this equipment must be securely attached to the floor/wall in accordance with
the installation instructions.
●
The main element of the turnstile is stainless steel, which is rustless (antioxidant) and corrosion
resistant (The anti corrosion ability in the medium of acid, alkali, and salt). In order to keep the
stainless steel from being oxidized or corroded, you should clean and care the turnstile surface
periodically.
The instructions and tips for maintaining the turnstile are as follows:
○
Select different stainless steel types according to the variety of the environments. You can
select 304 stainless steel for common circumstances and 316 stainless steel for the scenarios
of seasides and chemical plants.
○
Keep the device surface clean and dry.
○
Use non-woven cloth and ethyl alcohol to clean the dirt on the device surface.
○
Use sourcing pad (do not use mesh cleaning ball) to clean the rust on the device surface by
following the wire drawing on the stainless steel. And then use non-woven cloth and stainless
steel cleaner to wipe the device surface.
○
Clean and maintain the device by using non-woven cloth and stainless steel cleaner
periodically. It is suggest to clean the device every month in common circumstances and every
week for severe environments (seaside and chemical plants for instance.
●
Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or places
subject to shock (ignorance can cause equipment damage).
DS-K3G501SX Series Tripod Turnstile Quick Start Guide
vi
