HIKVISION DS-K3B220X Series, User Manual, Page: 41 / 115

Figure 4-18 Study Mode
2. Adjust the closed position of the barrier.
3. Power on the device.
The device will remember the current position (closed position) automatically.
4. Power off the device.
5. Set the No.1 switches of the 2-digit DIP Switch on the main user extended interface board by
referring to the following figure.
Figure 4-19 Normal Mode
6. Power on the device again.
Note
For details about the DIP switch value and meaning, see DIP Switch Description.
The barrier will open automatically and turns back to the closed position. At this circumstance,
the device enters the normal mode.
4.4.3 Keyfob Pairing
Pair keyfob via button or DIP switch.
Pair Keyfob via Button
Pair the remote control to the device via button to open/close the barrier remotely.
Steps
1. Set the configuration No. to "2" and the parameter to "2".
The device enters the keyfob pairing mode.
2. Hold the Close button for more than 10 seconds.
The keyfob's indicator of the will flash twice if the pairing is completed.
DS-K3B220X Series Swing Barrier User Manual
29