HIKVISION DS-K3B220X Series, User Manual, Page: 104 / 115

Appendix A. DIP Switch
A.1 DIP Switch Description
The DIP switch is on the access control board. No.1 and No 2 is from the low bit to the high bit.
Figure A-1 DIP Switch
When the switch is towards ON, it means the switch is enabled, otherwise, the switch is off.
A.2 DIP Switch Corresponded Functions
Note
After setting the DIP switch, you should reboot the device, or the function cannot take effect.
The 2-bit DIP switch corresponded functions on the access control board are as follows:
Bit Device Mode Function Decimal Value DIP Switch
Address Diagram
1 Work Mode Normal Mode 0
Study Mode 1
2 Keyfob Paring
Mode
Disable Keyfob
Paring Mode
0
Enable Keyfob
Paring Mode
1
DS-K3B220X Series Swing Barrier User Manual
92