Secure Door Control Unit www.hikvision.com
6
Chapter 2
Installation
2.1
Introduction
of DIP Switch
For the DIP switch position, please refer to No.3 of Table 2.1
Description of Rear View. The DIP switch module is shown below. The
number of DIP switch from left to right is 1 to 4.
Figure 2. 1
DIP Switch Module (Binary Code: 0000)
The table shows below is the description of the DIP switch.
Table 2. 1
Description of DIP Switch
Icon
Description
Represent 0 in binary mode
Represent 1 in binary mode
For example, the binary codes of the following figure from No.1 to 4
are 0011 respectively.
