Note
For details about face recognition, see Tips When Collecting/Comparing Face Picture .
5. Optional: Tap to edit the employee ID.
6.2 Enroll Fingerprint via Device
Before You Start
• Power on and activate the device. For details about the activation, see Activation .
• Set fingers in Select Finger in Set Enrollment Rule after logging in the device backend.
Steps
1. Tap on the initial page.
2. Optional: If you have added an administrator's face in Add Administrator and enabled Verify by
Administrator in Set Enrollment Rule , you should verify the administrator's permission.
Figure 6-2 Authenticate Administrator Page
-
Make sure the face is in the face recognition frame when authentication.
Note
For details about face recognition, see Tips When Collecting/Comparing Face Picture .
-
Tap on the right side and enter the administrator's name and password.
3. Enter the User Enrollment page.
-
For user not added: Create an employee ID and tap Add or present a card on the card
presenting area.
-
For user added: Enter the created employee ID and tap Search or present a card on the card
presenting area.
4. Enroll fingerprint.
1) Tap to enter the Select Finger page.
2) Select a finger on the Select Finger page.
Note
You can set fingers in Set Enrollment Rule .
DS-K1F600U-D6E Series Enrollment Station User Manual
9
