Edge Facial Recognition Server
·
User Manual
15
Figure 5-5
Synchronize List Data
5.2 Operation and Maintenance
It allows you to check usage rate about CPU, memory, disk, GPU, etc.
Step 1
Go to
System Management
>
Operation and Maintenance
>
Hardware Status
.
Step 2
Click
in
Details
list.
Figure 5-6
Hardware Status Interface
Step 3
Check different hardware status and usage rate.
5.3 System Configuration
5.3.1 General Configuration
You do not need to set any parameters, and just use the default values.
The server enables device filter function by default, and you can access to the server via its IP
address only. If you have configured port mapping, please disable the device filter function in order
to access to the server normally.
5.3.2 Service Configuration
It supports sending task analysis results to configured address.
Before you start:
Obtain IP address, port or URL.
Step 1
Go to
System Management
>
System Configuration
>
Service
.
Summary of Contents for DS-IE6316-EL/FA
Page 1: ...Edge Facial Recognition Server User Manual...
Page 52: ...UD15481B...
