Chapter 3 Client Operation
You can turn on/off the monitor, switch the input signal through the ScreenControl client.
3.1 Log in to Client
If you use the client software for the first time, set Control Mode and Screen Type.
Before You Start
Obtain the ScreenControl software from the CD-ROM and install it.
Steps
1. Double-click the client software shortcut to open the client.
2. Select Control Mode to serial port.
3. Select Screen Type to LCD-D50.
4. Select User Name to guest.
5. Click Login to log in to the client software.
3.2 Configure Serial Port
The client controls the screen by connecting the serial port.
Steps
1. Click System Configuration → Serial Port Configuration .
2. Select Serial Port.
3. Set Buad Rate to 9600.
4. Click Open to connect the serial port.
5. Optional: Click Close to disconnect the serial port.
3.3 Startup/Shutdown
You can turn on/off the monitors via the client.
Before You Start
Configure the serial port, and see Configure Serial Port for details.
Steps
1. Open the Screen Control page.
2. Hold the mouse to draw a rectangle to select one or multiple virtual screens.
3. Turn on/off the monitors.
-
Right click to select Startup/Shutdown.
-
Click to turn off the monitors. Or click to turn on the monitors.
LCD Monitor User Manual
17
Summary of Contents for DS-D5043FL-B
Page 1: ...LCD Monitor User Manual ...
Page 5: ...3 4 Switch Input Source 18 LCD Monitor User Manual iv ...
Page 24: ...UD10637B ...
