User Manual of DS-8100HMI-STM Series Mobile DVR
17
17
1.3.2
Timing On/Off
Figure 1. 10 Timing On/Off
Please follow the procedure below:
Steps:
1.
Connect the “DC IN +” and “KEY +” of DVR to the positive pole of vehicle batteries;
2.
Connect the “DC IN -” and “KEY -” of DVR to the negative pole of vehicle batteries;
Note:
For detailed information about automatically starting up and shutting down the DVR, please see
Chapter 6.1
.
1.4
Connecting to Alarm Input / Output Device
Connecting to Alarm Input
DS-8100HMI-STM series Mobile DVR adopts the high/low-level electrical signals triggering (high level: 6~36 VDC;
low level: 0~5 VDC) to realize alarm input. And in order to avoid error report caused by voltage fluctuation, no
alarm will be triggered by voltage ranging of 5~ 6VDC. Alarm input and Mobile DVR must be with common
grounding.
Figure 1. 11 Alarm Input Connection
Connecting to Alarm Output
The contact closure signal is used for the alarm output triggering. When there is an alarm output triggered, the
contact A and B of the Alarm Output will be closed. Therefore, the active alarm device must be connected.
Summary of Contents for DS-8100HMI-SE Series
