User Manual of DS-8100HMI-STM Series Mobile DVR
38
38
The Mobile DVR can be remotely accessed via 3 platforms: WVS platform, iVMS platform and Push Mode platform.
Make sure the parameters configured are valid for the platform you select for login.
5.1
Accessing by the WVS Platform
Steps:
1.
Enter the Platform Settings interface.
Menu>Basic Settings>Platform
2.
Select
Platform WVS
in
Select Platform
, as shown in Figure 5.1.
Figure 5. 1 WVS Platform Settings
3.
Configure the following parameters:
Server IP
: Input the static WAN IP of WVS server.
Port No
: The same as the client port of server, the default value is 5660.
Device Register ID
and
Register Password
: The ID and password of the Mobile DVR registered in the
manage system of WVS. The ID should start with “1”, and with length of 9 numbers. You need to register the
ID and password for the device in the WVS platform before using.
4.
After configuration, you can enter the Platform Status interface (Menu>Status>Plat) to check the status of WVS
platform.
5.2
Accessing by the iVMS Platform
Steps:
1.
Enter the Platform Settings interface.
Menu>Basic Settings>Platform
2.
Select
Platform iVMS
in
Select Platform
, as
shown
in Figure 5.2
.
Summary of Contents for DS-8100HMI-SE Series
