HIKVISION DS-7604NI-E1/4P, User Manual

Page: 17 / 135

DS-7600 Series NVR User’s Manual
17
PTZ camera.
ENTER
The ENTER button is used to confirm selection in any of
the menu modes.
It can also be used to tick checkbox fields.
In Playback mode, it can be used to play or pause the video.
In single-frame Playback mode, pressing the button will
advance the video by a single frame.
In Auto-switch mode, it can be used to stop /start auto
switch.
13 PTZ
Enter the PTZ Control mode.
In the PTZ Control mode, it is used to adjust the iris of the
PTZ camera.
14
ESC
Back to the previous menu.
Press for Arming/disarming the device in Live View mode.
15 RESERVED
Reserved.
16 F1
Select all items on the list when used in a list field.
In PTZ Control mode, it will turn on/off PTZ light (if
applicable).
In Playback mode, it is used to switch between play and
reverse play.
17 PTZ Control
Buttons to adjust the iris, focus and zoom of a PTZ camera.
18
F2
Cycle through tab pages.
In synchronous playback mode, it is used to switch between
channels.
Aim the remote control at the IR receiver located at the front of the unit to test operation. If there is no
response:
1. Using the mouse, go into Menu > System Configuration > General > More Settings.
2. Check and remember NVR ID#. The default ID# is 255. This ID# is valid for all IR controls.
3. Press the DEV button on the remote.
4. Enter the NVR ID# from step 2.