HIKVISION DS-7600NI-SE/P Series, User Manual

Page: 85 / 114

DS-7600 Series NVR User’s Manual
85
9. Input the password and click the Apply button to save the settings. Click OK to exit this menu.
Click Cancel without clicking Apply or OK will back without saving.
10. You can click on the camera list anytime you want to configure the added camera.
11. If the camera is manually added, you can select the camera and click the Advance Set button to
pop up an Advance Settings window, as shown in Figure 83.
Figure 83 Advance Settings Menu
1. Select the Network tab to modify the IP Camera Address and Configuration Port. Click Apply to
save the settings.
2. Select Password tab to change the password. Click Apply to save the settings.
3. Select Maintenance tab to reboot or default the selected camera.
4. Select Upgrade tab to upgrade IPC using firmware from external storage device.
5. Click OK to back to the previous menu.
6. If the camera status turns Disconnected to Connected, you can click to get the live view of
the camera.
Note:
Support third party IP camera: PANASONIC, SONY, AXIS, SANYO, BOSCH, and ACTI.