HIKVISION DS-7600NI-SE/P Series, User Manual

Page: 63 / 114

DS-7600 Series NVR User’s Manual
63
Figure 48 UPnP Settings Menu
2. Check the Enable UPnP checkbox.
3. Select the Mapped Type. There are two types:

Auto : Automatic mapping port 8000, 80, 10554, 443.

Manual : Edit the port by click .
4. Click the Apply button to save the settings.
Configuring More Settings
You can configure alarm host and port by selecting the more setting tab, as shown in Figure 51.
Figure 49 More Settings Menu
1. Alarm Host : Send the alarm event or exception message to the alarm host when an alarm is
triggered. The remote alarm host must have the CMS (Client Management System) Software
installed.

Enter the IP address of the remote PC on which the CMS Software is installed in.

Enter the alarm monitoring port in Alarm Host Port, which must be the same as the port
configured in the software.