HIKVISION DS-7300HFI Series User Manual Download Page 73

Page: 73 / 202

User Manual of DS-7300HI/7300HFI/8100HDI-ST Series DVR

5.7 Configuring Other Recording and Capture

Types

Purpose:

Other recording and capture types refer to the Motion | Alarm (motion or alarm) and Motion & Alarm triggered

recording and capture.

For motion detection and alarm recording and capture, please refer to

Chapter 5.3

and

Chapter 5.4

. In this chapter,

the configuration for Motion | Alarm and Motion & Alarm triggered recording and capture will be described only.

Steps:

Enter the Record setting interface.

Menu> Record> Schedule

Select

Record/ Capture

Figure 5.29 Record Schedule

Schedule Motion | Alarm or Motion & Alarm triggered recording.

Select the channel you want to set schedule.

Check the check box after Enable Schedule

Click

Edit

Select Motion | Alarm or Motion & Alarm in the

Type

dropdown list.

alarm shop

Summary of Contents for DS-7300HFI Series











































































































































































































Search results

Summary of Contents for DS-7300HFI Series

Reviews:

Related manuals for DS-7300HFI Series

Brands by name

Popular brands

HIKVISION DS-7300HFI Series, User Manual

Search results

Summary of Contents for DS-7300HFI Series

Reviews:

Related manuals for DS-7300HFI Series

Brands by name

Popular brands