HIKVISION DS-7300HFI Series User Manual Download Page 38

Page: 38 / 202

User Manual of DS-7300HI/7300HFI/8100HDI-ST Series DVR

Next Screen

Switch to the next screen.

Start/Stop Auto-switch

Enable/disable the auto-switch of the screens.

All-day Playback

Play back the video of the selected channel.

Aux Monitor

Switch to the auxiliary output mode and the operation for the main output is

disabled.

Note:

The

dwell time

of the live view configuration must be set before using

Start Auto-switch

Note:

If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation is disabled,

switch back to the Main output with the 2ABC/F1 button on the front panel or IR remote control.

Note:

If the corresponding camera supports intelligent function, the Reboot Intelligence option will be included

when right-clicking mouse on this camera.

Figure 3.1 Right-click Menu

3.2.3 Using an Auxiliary Monitor

Certain features of the Live View are also available while in an Aux monitor. These features include:

•

Single Screen:

Switch to a full screen display of the selected camera. Camera can be selected from a

dropdown list.

•

Multi-screen:

Switch between different display layout options. Layout options can be selected from a

dropdown list.

•

Next Screen:

When displaying less than the maximum number of cameras in Live View, clicking this

feature will switch to the next set of displays.

•

Playback:

Enter into Playback mode.

•

PTZ:

Enter PTZ Control mode.

•

Main Monitor:

Enter Main operation mode.

Note:

In the live view mode of the main output monitor, the menu operation is not available while in Aux output

mode.

3.2.4 Quick Setting Toolbar in Live View Mode

On the screen of each channel, there is a quick setting toolbar which shows when you point the mouse to the

alarm shop

Summary of Contents for DS-7300HFI Series











































































































































































































Search results

Summary of Contents for DS-7300HFI Series

Reviews:

Related manuals for DS-7300HFI Series

Brands by name

Popular brands

HIKVISION DS-7300HFI Series, User Manual

Search results

Summary of Contents for DS-7300HFI Series

Reviews:

Related manuals for DS-7300HFI Series

Brands by name

Popular brands