HIKVISION DS-7208/16HWI-SV Page 23 User Manual Download

Page: 23 / 261

User Manual of Digital Video Recorder

A Button

Adjust focus in the PTZ Control menu.

It is also used to switch input methods (upper and lowercase alphabet,
symbols and numeric input).

REC Button

Enter the Manual Record setting menu.

In PTZ control settings, press the button and then you can call a PTZ

preset by pressing Numeric button.

It is also used to turn audio on/off in the Playback mode.

PLAY Button

The button is used to enter the Playback mode.

It is also used to

auto scan in the PTZ Control menu.

INFO Button

Reserved for future usage.

VOIP/MON Button

Switch main and spot output.

In PTZ Control mode, it can be used to zoom out the image.

MENU Button

Press the button will help you return to the Main menu (after successful

Press and hold the button for 5 seconds will turn off audible key beep.

In PTZ Control mode, the MENU/WIPER button will start wiper (if
applicable).

In Playback mode, it is used to show/hide the control toolbar.

PREV Button

Switch single screen and multi-screen mode.

In PTZ Control mode, it is used to adjust the focus in conjunction with

the A/FOCUS+ button.

DIRECTION/ENTER

Buttons

The DIRECTION buttons are used to navigate between different fields

and items in menus.

In the Playback mode, the Up and Down button is used to speed up and

slow down recorded video. The Left and Right button will select the

next and previous record files.

In Live View mode, these buttons can be used to cycle through

channels.

In PTZ control mode, it can control the movement of the PTZ camera.

The ENTER button is used to confirm selection in any of the menu
modes.

It can also be used to

tick

checkbox fields.

In Playback mode, it can be used to play or pause the video.

In single-frame Playback mode, pressing the button will advance the
video by a single frame.

In Auto-switch mode, it can be used to stop /start auto switch.

PTZ Button

Enter the PTZ Control mode.

In the PTZ Control mode, it is used to adjust the iris of the PTZ camera.

ESC Button

Back to the previous menu.

Press for arming/disarming the device in Live View mode.

RESERVED

Reserved for future usage.

F1 Button

Select all items on the list when used in a list field.

In PTZ Control mode, it will turn on/off PTZ light

(if applicable).

In Playback mode, it is used to switch play and reverse play.

PTZ Control Buttons

Buttons to adjust the iris, focus and zoom of a PTZ camera.

F2 Button

Cycle through tab pages.

In synchronous playback mode, it is used to switch channels.

Remote Control Troubleshooting:

Summary of Contents for DS-7208/16HWI-SV






































































































































































































































































Search results

Summary of Contents for DS-7208/16HWI-SV

Reviews:

Related manuals for DS-7208/16HWI-SV

Brands by name

Popular brands

HIKVISION DS-7208/16HWI-SV, User Manual

Search results

Summary of Contents for DS-7208/16HWI-SV

Reviews:

Related manuals for DS-7208/16HWI-SV

Brands by name

Popular brands