HIKVISION DS-7208/16HWI-SV User Manual Download Page 228

Page: 228 / 261

User Manual of Digital Video Recorder

227

15.3

Importing/Exporting Configuration Files

Purpose:

The configuration files of the device can be exported to local device for backup; and the configuration files of one

device can be imported to multiple devices if they are to be configured with the same parameters.

Steps:

Enter the Import/Export Configuration File interface.

Menu > Maintenance > Import/Export

Select the backup device from the drop-down list.

Click

Export

to export configuration files of the device to the selected backup device.

To import the configuration file, select the file from the selected backup device and click

Import

After the import process is completed, the device will automatically reboot to activate the new settings.

Figure 15. 5

Import/Export Config File

Summary of Contents for DS-7208/16HWI-SV






































































































































































































































































Search results

Summary of Contents for DS-7208/16HWI-SV

Reviews:

HIKVISION DS-7208/16HWI-SV, User Manual, Page: 228 / 261

Search results

Summary of Contents for DS-7208/16HWI-SV

Reviews: