HIKVISION DS-7200HVI User Manual Download Page 85

Page: 85 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

6.2 Auxiliary Functions of Playback

6.2.1 Playing Back Frame by Frame

Purpose:

Play video files frame by frame, in order to check image details of the video when abnormal events happen.

Steps:

Go to Playback interface. If you choose playback of the record file: click button

and

until the speed

changes to

Single

frame and one click on the playback screen represents playback of one frame. If you choose

adverse playback of the record file: click button

and

until the speed changes to

Single

frame and

one click on the playback screen represents adverse playback of one frame. It is also feasible to use button

in toolbar.

6.2.2 Smart Search

Purpose:

In order to locate motion detection event easily and accurately in the playback progress bar, you are allowed to

analyze a certain area (scene) dynamically, and to get all of the related motion detection events that occurred in

this area.

Steps:

Go to All-day Playback interface and play the video.

Figure 6. 31 Interface of All-day Playback

Right-click mouse and select

Smart Search

to go to analysis area selection interface.

alarm shop

Summary of Contents for DS-7200HVI












































































































































































Search results

Summary of Contents for DS-7200HVI

Reviews:

HIKVISION DS-7200HVI, User Manual, Page: 85 / 171

Search results

Summary of Contents for DS-7200HVI

Reviews: