HIKVISION DS-7200HVI User Manual Download Page 126

Page: 126 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

125

9.4 Network Detection

Purpose:

You can obtain network connecting status of device through the network detection function, including network

delay, packet loss, etc.

9.4.1 Testing Network Delay and Packet Loss

Steps:

Enter the Network Traffic interface.

Menu > Maintenance > Net Detection

Click the

Network Detection

tab to enter the Network Detection menu.

Figure 9.28 Network Detection Interface

Enter the destination address in the text field of

Destination Address

Click the

Test

button to start testing network delay and packet loss. The testing result pops up on the

window. If the testing is failed, the error message box will pop up as well. .

Figure 9.29 Testing Result of Network Delay and Packet Loss

9.4.2 Exporting Network Packet

Purpose:

By connecting the device to network, the captured network data packet can be exported to USB-flash disk and

other local backup devices.

Steps:

Enter the Network Traffic interface.

Menu > Maintenance > Net Detection

Click the

Network Detection

tab to enter the Network Detection interface.

alarm shop

Summary of Contents for DS-7200HVI












































































































































































Search results

Summary of Contents for DS-7200HVI

Reviews:

HIKVISION DS-7200HVI, User Manual, Page: 126 / 171

Search results

Summary of Contents for DS-7200HVI

Reviews: