HIKVISION DS-7200HVI User Manual Download Page 145

Page: 145 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

144

11.1 Configuring OSD Settings

Purpose:

You can configure the OSD (On-screen Display) settings for the camera, including date /time, camera name, etc.

Steps:

Enter the OSD Configuration interface.

Menu > Camera > OSD

Select the camera to configure OSD settings.

Edit the Camera Name in the text field.

Configure the Display Name, Display Date and Display Week by clicking the checkbox.

Select the Date Format, Time Format and Display Mode.

Figure 11.1 OSD Configuration Interface

You can use the mouse to click and drag the text frame on the preview window to adjust the OSD position.

Copy Camera Settings

If you want to copy the OSD settings of the current camera to other cameras, click the

Copy

button to

enter the Copy Camera interface, as shown in Figure 11.2.

Figure 11.2 Copy Settings to Other Cameras

Select the camera (s) to be configured with the same OSD settings. You can also click the checkbox of

Analog to select all cameras.

alarm shop

Summary of Contents for DS-7200HVI












































































































































































Search results

Summary of Contents for DS-7200HVI

Reviews:

HIKVISION DS-7200HVI, User Manual, Page: 145 / 171

Search results

Summary of Contents for DS-7200HVI

Reviews: