HIKVISION DS-7108NI, User Manual

Page: 34 / 196

User Manual of WIFI Network Video Recorder
33
3.2 Operations in Live View Mode
In live view mode, there are many functions provided. The functions are listed below.
•
Single Screen : showing only one screen on the monitor.
•
Multi-screen: showing multiple screens on the monitor simultaneously.
•
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screen on
the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
•
Start Recording: continuous record and motion detection record are supported.
•
Output Mode: select the output mode to Standard, Bright, Gentle or Vivid.
•
Playback: playback the recorded videos for current day.
•
PTZ Control: enter PTZ control interface to rotate the PTZ.
•
Add IP Camera: the shortcut to the IP camera management interface.
3.2.1 Using the Mouse in Live View
Table 3. 2 Mouse Operation in Live View
Name Description
Menu Enter the main menu of the system by right-clicking the mouse.
Single Screen
Switch to the single full screen by choosing channel number from the drop-down
list.
Multi-screen Adjust the screen layout by choosing from the drop-down list.
Previous Screen Switch to the previous screen.
Next Screen Switch to the next screen.
Start/Stop Auto-switch
Enable/disable the auto-switch of the screens.
Start Recording Start continuous recording or motion detection recording of all channels.
Add IP Camera Enter the IP Camera management interface, and manage the cameras.
Playback
Enter the playback interface and start playing back the video of the selected
channel immediately.
PTZ Control
Enter PTZ control interface to rotate the PTZ to desired view.
Output Mode Four modes of output supported, including Standard, Bright, Gentle and Vivid.
The dwell time of the live view configuration must be set before using Start Auto-switch .